見出し

カテゴリ:Rotary balancer

 タイトル:Comparison of machining surfaces between standard tool and zero core tool

At Company A, the processed surface of the hardened material surface was processed under the same conditions, and the microscope was photographed. When comparing the machining planes with a 100 times image, it means that there is not much difference. However, comparing the appearance of the actual workpiece work against the fluorescence etc., the finished surface of the zero-core balancer was found to be clearly illuminated with the fluorescent light and it turned out to be finished with considerable surface quality I did it. As a result, when photographing an image photograph with the magnification magnified 700 times, apparently the machined surface of the standard tool shows a spotty path, whereas the machined surface at the zero core balancer sees a very fine path I was able to do it.In this way, even with the best machinery, shaking always occurs due to load fluctuations when machining, which adversely affects the machined surface.However, the zero core balancer tool has a value that allows zero core rotation with respect to processing load fluctuation, and it is the zero core balancer that the core shake is set to zero without limit as much as possible with respect to the processing load variation.

この記事への
 コメント
(サイト管理者承認後掲載されます)

コメント一覧

Copyrightc 2010 SSKPC Service All Rights Reserved.